Direct fix on several surfaces

Direct fix is ideal for areas for increased hygiene requirements. In our FRP we distinguish between standard requirements (storage rooms, stables, etc.) and areas with the highest standards (cheese ripening rooms, sausage making, etc.). For each area, we offer the ideal solution. GfK standard for standard ranges and glass board as our premium product for applications at the highest level. Of course, all products for use in food processing plants are suitable.

  • Fast mounted to most existing surfaces
  • Safe: takes some movement e.g. from thermal expansion
  • Permanently elastic: Even with small radii an installation without stress cracks is possible.
  • Hygienic 
  • reduced need for dentergents
  • Hights up to 3,0 m without horizontal jointing is possible!

Also observe the current installation instructions and data sheets! You can receive them at info@hydewa.com.

Application with the Applicator System

For big areas over 30 m2 we recommend the use of 1800ml bags hydewa special adhesive.

 

Use of 1800ml bags adhesive

• Please note technical data sheets and safety data sheets.

• Prepare your tools and surface. Diffusion density surfaces should, be slightly moistened.

• Fill the Applicators with the fitting bags and connect them correctly to pressure air if neccessary.

• ! Use 1-C when you expect big changes in temperature or humidity !

• All around comply with ~6mm jointing for expansion.

• After finishing be sure to clean all your tools properly.

 

Application with the Applicator System

Manual application

For small areas up to 30 m2 we recommend the use of 600ml bags hydewa special adhesive.

 

Use of 600ml bags adhesive

• Please note technical data sheets and safety data sheets.

• Prepare your tools and surface. Diffusion density surfaces should, be slightly moistened.

• Fill the Applicators with the fitting bags and connect them correctly to pressure air if neccessary.

• ! Use 1-C when you expect big changes in temperature or humidity !

• All around comply with ~6mm jointing for expansion.

• After finishing be sure to clean all your tools properly.

Manual application